Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

13.06.2025 00:52

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

For this case there are devices called Metal oxide varistors (MOV).

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

He then asserts :

How do you like to be pegged?

Edit 2024–10.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

The other is “what does a “fuse” do?”

What is the difference between Michael Corleone’s marriage to Apollonia Vitelli and Kay Adams?

These devices are installed between the “hot” and “neutral” and protective ground.

He then describes the function of a fuse.

But… the neutral is now “floating” because of the 1 ohm resistance.

Carlos Alcaraz praised for showing 'insane sportsmanship' during his French Open match against Ben Shelton - The Tennis Gazette

In schematic diagrams this is the symbol for a fuse:

[image of Common-mode choke]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

How do I get over a long-term relationship breakup?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Upvotes:

We finally may be able to rid the world of mosquitoes. But should we? - The Washington Post

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

A circuit breaker is similar, but is resettable.

Why does my 5-year-old daughter keep repeating the words 'they will come for us, they will find us and touch us'? I'm quite scared.

Because the load is inductive, the current lags the voltage.(by a bit).

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This one hit behind the barn.

AMC Theaters to Run Even More Commercials Before Movies Play - Bloomberg.com

But it can get overloaded, and no longer works.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Barnstars:

At what point does trespassing become self defense? What are the necessary conditions for this line to be crossed from trespassing to self defense?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

These are simplified answers to the original question, and does not change anything I wrote above.

This is 'the assistant's answer'

Approximately 1.7 million air conditioners voluntarily recalled for potential mold exposure - ABC News

2024–10–10[John johnson John Johnson ]

The bolt then partially travels down the line to your home.

At one ohm, the resistor has a maximum of 1 watt power.

How much does a doctor earn in Sweden per month?

One

This is where this question deviates from being a 'generic' question, and becomes more specific.

but I think this circuit , shows a few more pieces.

"It Seems Like Science Fiction”: Researchers Unleash Breakthrough Tracking Technology Using Environmental DNA - The Debrief

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

(Dc diagram shown, AC is similar).

What would happen if the Earth stopped spinning for one minute?

What does a fuse do?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

One is “what exactly is in a ‘surge protector’ ? ”

Why do men suck dick? Me, I can't get enough

It seems Mohan does not understand the difference between a comment and an Answer.

a photo is worth a thousand words.

What is lightning?

The two rules investors need to follow right now as the S&P 500 eyes a return to 6,000 - MarketWatch

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Now when you have a certain ac resistance, then a current flows in a loop.

so, what happens?

nine

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

A fuse is a non-resetable over current circuit protector.

He then describes Rainy Season and Lightning.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

what exactly is a ‘surge’ protector?

I post the exact comment here.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

An AC voltage/ current source, and an ac inductive load.

2024–10–16 [ OO OLAOYE OYEBODE ]

but this device (an Inductor) … impedes the rapid changes in the current.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

The third is lightning and “how it gets conducted into a home.”

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Here is a simplified AC power diagram.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

There are two important concepts here.

[old diagram got deleted by accident]

It also is a device that limits the change in current flow.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

So, the voltage could go up to 500 volts, and the fuse will not open up.

At least they know the answer if they wanted it.

There are three different concepts here that are getting confused.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This device then solves the entire problem.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

eight

the problem then depends on "how fast does the fuse operate?".

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is where the MOV conducts again, and dissipated the energy.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

First Sentence:

The MOV will conduct when the voltage exceeds 50% of line voltage.